Gönderen Konu: Programı kuramıyorum Wine 1.2.2 Yardım  (Okunma sayısı 12467 defa)

0 Üye ve 1 Ziyaretçi konuyu incelemekte.

Çevrimdışı mc_baris

  • Yeni Üye
  • *
  • İleti: 18
Programı kuramıyorum Wine 1.2.2 Yardım
« : 05 Haziran 2009, 07:36:19 ös »
ben wime-1.1.2.tar.bz2 bunu indirdim flash bellek e  attım laptop ada taktım ama nasıl kuracam :D acemiyim k.bakmayın yeni yeni öğreniyorum. Driver Cd sindeki kablosuz ağ ı kurmam lazım pc ye cd deki .exe uzantılı.marka ve modelini bilmiyorum kablosuz ağ ın :S

.\ configure falan yaz diyorlar konsola yazıyorum ama birşey olmuyor make install yazıyorum olmuyo

flash ımı gösterecem ordan birşey anlamadım :S:S
« Son Düzenleme: 05 Haziran 2009, 07:41:44 ös Gönderen: mc_baris »

Çevrimdışı mc_baris

  • Yeni Üye
  • *
  • İleti: 18
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #1 : 05 Haziran 2009, 09:17:53 ös »
Tamam Bu Sorunu Çözdüm Kpackage İle Kurdum Aslın Kolay Bir İşletim Sistemi Alışmak Gerekiyor :D Ama Wine İle .exe leri Nasıl Çalıştıracam Onu Çözemedim ve ben bu pc yi web server yapıcam 512 ekran kartı 2 gb ram 150 gb harddisk 1gb bağlantı var ama onu 8 gb yapacam

Çevrimdışı AzerRail

  • Katkıcı Üye
  • ***
  • İleti: 196
  • Linuks diyorum başka bir nen demiyorum !
    • AzerRail'in Masaüstü
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #2 : 05 Haziran 2009, 09:28:59 ös »
İndirdiğin .exe uzantılı belgelere sağ tıkladığında "wine ile çalıştır" yazısı çıkması gerekiyor.Ona tıkladığında yazılımı kurarsın. Sonrasında menüde adı çıkıyor, tıkla açılsın.

Çevrimdışı atlantis

  • Yönetici
  • Forum Gurusu
  • *****
  • İleti: 600
  • Truva Linux
    • Truva Linux
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #3 : 05 Haziran 2009, 10:47:42 ös »
Cihazın marka ve modeli nedir?

Çevrimdışı mc_baris

  • Yeni Üye
  • *
  • İleti: 18
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #4 : 06 Haziran 2009, 11:40:46 öö »
Casper Nirvana Model : M762SU
bunda tıklıyorum wine ile aç yazmıyo birlikte aç diyorum ordan sisteme giriyorum wine config yazıyo onla açıncada wine yapılandırması yazıyor.

Çevrimdışı atlantis

  • Yönetici
  • Forum Gurusu
  • *****
  • İleti: 600
  • Truva Linux
    • Truva Linux
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #5 : 06 Haziran 2009, 04:14:53 ös »
Sürücüyü wine ile kurmaya uğraşmayın. lspci ve dmesg çıktılarını yollayın bakalım.

Çevrimdışı mc_baris

  • Yeni Üye
  • *
  • İleti: 18
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #6 : 06 Haziran 2009, 04:18:22 ös »
Bir Şey Anlamadım :S Windows Gibi Diilki Bu Şimdi .exe Dosyasına Sağ Tuşla Tıklıyorum Yeni Pencere,Yeni Sekmede Aç,Kopyala,Birlikte Aç,Eylemler,Kopyala,Özellikler bunlar yazıyo Ispci ve demsg falan bilmiyorum :S windowsa gerimi dönsem şunun kablosuz ağını yapsam başka birşeye gerek yok .exe ler çalışsın yeter :S

Çevrimdışı atlantis

  • Yönetici
  • Forum Gurusu
  • *****
  • İleti: 600
  • Truva Linux
    • Truva Linux
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #7 : 06 Haziran 2009, 04:21:13 ös »
Karçı ilk sorun çıktığında hemen pes edeceksen windows kullanman daha mantıklı olur. kablosuz ağ cihazının Linux tarafından tanınıp tanınmadığını öğrenmek için bazı komutların çıktısını görmemiz lazım. Bir konsol yani kara ekran açıp bu komutları vermelisin. Çıktıları da buraya yapıştıracaksın.

Çevrimdışı mc_baris

  • Yeni Üye
  • *
  • İleti: 18
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #8 : 06 Haziran 2009, 04:28:42 ös »
konsola ne yazacam ? driveri aradımda bu site çıktı ama hacked falan yazıyor http://briancantin.blogspot.com/2007/11/hacking-rtl8187b-on-linux.html
« Son Düzenleme: 06 Haziran 2009, 04:30:59 ös Gönderen: mc_baris »

Çevrimdışı atlantis

  • Yönetici
  • Forum Gurusu
  • *****
  • İleti: 600
  • Truva Linux
    • Truva Linux
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #9 : 06 Haziran 2009, 04:35:14 ös »
Konsolda lspci ve dmesg komutlarını vereceksin ve çıktısını göndereceksin. rtl8187b ise sürücüsüne ona göre bakacaz.

Çevrimdışı mc_baris

  • Yeni Üye
  • *
  • İleti: 18
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #10 : 06 Haziran 2009, 04:48:47 ös »
dmesg yaptım bir sürü yazı çıktı nasıl kaydediğ flash a atacam bunu ?

Çevrimdışı atlantis

  • Yönetici
  • Forum Gurusu
  • *****
  • İleti: 600
  • Truva Linux
    • Truva Linux
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #11 : 06 Haziran 2009, 05:14:14 ös »
Copy-Paste :D

Çevrimdışı mc_baris

  • Yeni Üye
  • *
  • İleti: 18
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #12 : 06 Haziran 2009, 05:14:55 ös »
oldu flash a attım şimdide bu pc flashı görmüyo allahım yaaaa :S:S
« Son Düzenleme: 06 Haziran 2009, 05:17:08 ös Gönderen: mc_baris »

Çevrimdışı mc_baris

  • Yeni Üye
  • *
  • İleti: 18
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #13 : 06 Haziran 2009, 05:18:12 ös »
Kod: [Seç]
Linux version 2.6.24.3 (root@atlantis) (gcc version 4.2.3) #1 SMP Tue J
ul 29 13:23:43 EEST 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fd90000 (usable)
 BIOS-e820: 000000007fd90000 - 000000007fd9b000 (ACPI data)
 BIOS-e820: 000000007fd9b000 - 000000007fd9c000 (ACPI NVS)
 BIOS-e820: 000000007fd9c000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
1149MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f8050
Entering add_active_range(0, 0, 523664) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   229376
  HighMem    229376 ->   523664
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   523664
On node 0 totalpages: 523664
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1760 pages used for memmap
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 2299 pages used for memmap
  HighMem zone: 291989 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7FA0, 0024 (r2 PTLTD )
ACPI: XSDT 7FD9265A, 008C (r1 CASPER      ERA  6040000  LTP        0)
ACPI: FACP 7FD9ACFC, 00F4 (r3 SiS    671MX     6040000 PTL     F4240)
ACPI: DSDT 7FD967B9, 44CF (r1 PTLTD       671  6040000 MSFT  3000001)
ACPI: FACS 7FD9BFC0, 0040
ACPI: APIC 7FD9ADF0, 005E (r1 PTLTD      APIC    6040000  LTP        0)
ACPI: SLIC 7FD9AE4E, 0176 (r1 CASPER      ERA  6040000  LTP        0)
ACPI: MCFG 7FD9AFC4, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
ACPI: SSDT 7FD93F8A, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050228)
ACPI: SSDT 7FD93EE4, 00A6 (r1  PmRef  Cpu7Tst     3000 INTL 20050228)
ACPI: SSDT 7FD93E3E, 00A6 (r1  PmRef  Cpu6Tst     3000 INTL 20050228)
ACPI: SSDT 7FD93D98, 00A6 (r1  PmRef  Cpu5Tst     3000 INTL 20050228)
ACPI: SSDT 7FD93CF2, 00A6 (r1  PmRef  Cpu4Tst     3000 INTL 20050228)
ACPI: SSDT 7FD93C4C, 00A6 (r1  PmRef  Cpu3Tst     3000 INTL 20050228)
ACPI: SSDT 7FD93BA6, 00A6 (r1  PmRef  Cpu2Tst     3000 INTL 20050228)
ACPI: SSDT 7FD93B00, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050228)
ACPI: SSDT 7FD926E6, 141A (r1  PmRef    CpuPm     3000 INTL 20050228)
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
swsusp: Registered nosave memory region: 000000000009d000 - 00000000000
9e000
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000
a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000
d0000
swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000
d4000
swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000
e4000
swsusp: Registered nosave memory region: 00000000000e4000 - 00000000001
00000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 51
9573
Kernel command line: root=/dev/sda2 ro quiet BOOT_IMAGE=/boot/vmlinuz
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1866.158 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2066592k/2094656k available (6327k kernel code, 26788k reserved
, 2039k data, 384k init, 1177152k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe14000 - 0xfffff000   (1964 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc0935000 - 0xc0995000   ( 384 kB)
      .data : 0xc072de8a - 0xc092bd3c   (2039 kB)
      .text : 0xc0100000 - 0xc072de8a   (6327 kB)
Checking if this processor honours the WP bit even in supervisor mode..
. Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3734.54 BogoMIPS (lpj=
7469091)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e39d 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39
d 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs...<6>ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3732.54 BogoMIPS (lpj=
7465080)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e39d 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39
d 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Pentium(R) Dual  CPU  T2390  @ 1.86GHz stepping 0d
Total of 2 processors activated (7467.08 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 64 bytes
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  6922.000 MB/sec
xor: using function: pIII_sse (6922.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: CASPER
ACPI: DMI Product Name: M7X0SU
ACPI: DMI Product Version: Rev. A1
ACPI: DMI Board Name: M7X0SU
ACPI: DMI BIOS Vendor: Phoenix Technologies LTD
ACPI: DMI BIOS Date: 08/28/0892
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.k
ernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a
 report
PCI: Cannot allocate resource region 0 of device 0000:00:09.0
Time: tsc clocksource has been installed.
system 00:04: ioport range 0x8000-0x80be has been reserved
system 00:04: ioport range 0x8100-0x812f has been reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0xfe00-0xfe00 has been reserved
system 00:04: ioport range 0x261-0x261 has been reserved
system 00:04: ioport range 0x200-0x20f has been reserved
system 00:04: ioport range 0x400-0x40f has been reserved
system 00:04: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:04: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: d0000000-d2ffffff
  PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:06.0
  IO window: 3000-4fff
  MEM window: dc000000-dfffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (bad gzip magic numbers); loo
ks like an initrd
Freeing initrd memory: 67k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug e
nabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Jul 29 2008 13:11:52) installed
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie02]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input1
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/virtual/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /devices/virtual/input/input3
ACPI: Lid Switch [LID]
ACPI: SSDT 7FD94AA4, 02DC (r1  PmRef  Cpu0Ist     3000 INTL 20050228)
ACPI: SSDT 7FD941E9, 0518 (r1  PmRef  Cpu0Cst     3001 INTL 20050228)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FD94D80, 022D (r1  PmRef  Cpu1Ist     3000 INTL 20050228)
ACPI: SSDT 7FD94701, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050228)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
 not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
 not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
 not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
 not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
 not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
 not present [20070126]
ACPI: Invalid passive threshold
« Son Düzenleme: 06 Haziran 2009, 05:21:18 ös Gönderen: AzerRail »

Çevrimdışı mc_baris

  • Yeni Üye
  • *
  • İleti: 18
Ynt: Programı kuramıyorum Wine 1.2.2 Yardım
« Yanıtla #14 : 06 Haziran 2009, 05:18:19 ös »
Kod: [Seç]
ACPI: Thermal Zone [THRM] (62 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enable
d
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebu
s=xx
SIS5513: IDE controller (0x1039:0x5513 rev 0x01) at  PCI slot 0000:00:0
2.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS968 ATA 133 (2nd gen) controller
    ide0: BM-DMA at 0x1080-0x1087, BIOS settings: hda:DMA, hdb:pio
SIS5513: IDE port disabled
Probing IDE interface ide0...
hda: Optiarc DVD RW AD-7530B, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2449]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ usin
g iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.2
Copyright(c) 2004-2007 Emulex.  All rights reserved.
seagate: ST0x/TMC-8xx not detected.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
        with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx SATA Controller driver v1.2 (070830)
st: Version 20070203, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_sis 0000:00:05.0: version 1.0
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 17
sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in
 PATA mode
scsi2 : sata_sis
scsi3 : sata_sis
ata1: PATA max UDMA/133 cmd 0x10c8 ctl 0x10bc bmdma 0x10a0 irq 17
ata2: PATA max UDMA/133 cmd 0x10c0 ctl 0x10b8 bmdma 0x10a8 irq 17
ata1.00: ATA-8: TOSHIBA MK1652GSX, LV010A, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK1652GS LV01 PQ: 0 AN
SI: 5
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't su
pport DPO or FUA
sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't su
pport DPO or FUA
 sda: sda1 < sda5 > sda2
sd 2:0:0:0: [sda] Attached SCSI disk
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:03.3[C] -> GSI 22 (level, low) -> IRQ 18
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 18, io mem 0xd3206000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 19, io mem 0xd3204000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 20, io mem 0xd3205000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb 1-7: new high speed USB device using ehci_hcd and address 2
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usb 1-7: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1    727 MB/s
raid6: int32x2    744 MB/s
raid6: int32x4    579 MB/s
raid6: int32x8    524 MB/s
raid6: mmxx1     2360 MB/s
raid6: mmxx2     2753 MB/s
raid6: sse1x1    1560 MB/s
raid6: sse1x2    2057 MB/s
raid6: sse2x1    2849 MB/s
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x20
2000
raid6: sse2x2    3344 MB/s
raid6: using algorithm sse2x2 (3344 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@r
edhat.com
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Starting balanced_irq
Using IPI No-Shortcut mode
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/inp
ut/input4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/i
nput/input5
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Couldn't find valid RAM disk image starting at 0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 384k freed
sd 2:0:0:0: Attached scsi generic sg0 type 0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci: SDHCI controller found at 0000:00:09.1 [1524:0750] (rev 0)
ACPI: PCI Interrupt 0000:00:09.1[A] -> GSI 17 (level, low) -> IRQ 17
mmc0: SDHCI at 0x88000000 irq 17 DMA
sdhci: SDHCI controller found at 0000:00:09.3 [1524:0751] (rev 0)
ACPI: PCI Interrupt 0000:00:09.3[A] -> GSI 17 (level, low) -> IRQ 17
sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to su
pport it.
PCI: Setting latency timer of device 0000:00:09.3 to 64
mmc1: SDHCI at 0x88000100 irq 17 DMA
sis190 Gigabit Ethernet driver 1.2 loaded.
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:04.0 to 64
0000:00:04.0: Read MAC address from EEPROM
Linux agpgart interface v0.102
0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1.
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0c
/LNXVIDEO:00/input/input6
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
0000:00:04.0: Using transceiver at address 1 as default.
0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8d2e000 (IRQ: 21
), 00:90:f5:84:1a:99
eth0: GMII mode.
eth0: Enabling Auto-negotiation.
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0f.0 to 64
hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
EXT3 FS on sda2, internal journal
NTFS volume version 3.1.
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
usb 1-8: new high speed USB device using ehci_hcd and address 3
usb 1-8: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access     FLASH    Drive AU_USB20   8.07 PQ: 0 AN                            SI: 2
sd 4:0:0:0: [sdb] 8155136 512-byte hardware sectors (4175 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] 8155136 512-byte hardware sectors (4175 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
 sdb: unknown partition table
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 1-2: new high speed USB device using ehci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
« Son Düzenleme: 06 Haziran 2009, 05:21:30 ös Gönderen: AzerRail »