Linux version 2.6.24.3 (root@atlantis) (gcc version 4.2.3) #1 SMP Tue J
ul 29 13:23:43 EEST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fd90000 (usable)
BIOS-e820: 000000007fd90000 - 000000007fd9b000 (ACPI data)
BIOS-e820: 000000007fd9b000 - 000000007fd9c000 (ACPI NVS)
BIOS-e820: 000000007fd9c000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
1149MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f8050
Entering add_active_range(0, 0, 523664) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 523664
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 523664
On node 0 totalpages: 523664
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2299 pages used for memmap
HighMem zone: 291989 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F7FA0, 0024 (r2 PTLTD )
ACPI: XSDT 7FD9265A, 008C (r1 CASPER ERA 6040000 LTP 0)
ACPI: FACP 7FD9ACFC, 00F4 (r3 SiS 671MX 6040000 PTL F4240)
ACPI: DSDT 7FD967B9, 44CF (r1 PTLTD 671 6040000 MSFT 3000001)
ACPI: FACS 7FD9BFC0, 0040
ACPI: APIC 7FD9ADF0, 005E (r1 PTLTD APIC 6040000 LTP 0)
ACPI: SLIC 7FD9AE4E, 0176 (r1 CASPER ERA 6040000 LTP 0)
ACPI: MCFG 7FD9AFC4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: SSDT 7FD93F8A, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
ACPI: SSDT 7FD93EE4, 00A6 (r1 PmRef Cpu7Tst 3000 INTL 20050228)
ACPI: SSDT 7FD93E3E, 00A6 (r1 PmRef Cpu6Tst 3000 INTL 20050228)
ACPI: SSDT 7FD93D98, 00A6 (r1 PmRef Cpu5Tst 3000 INTL 20050228)
ACPI: SSDT 7FD93CF2, 00A6 (r1 PmRef Cpu4Tst 3000 INTL 20050228)
ACPI: SSDT 7FD93C4C, 00A6 (r1 PmRef Cpu3Tst 3000 INTL 20050228)
ACPI: SSDT 7FD93BA6, 00A6 (r1 PmRef Cpu2Tst 3000 INTL 20050228)
ACPI: SSDT 7FD93B00, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228)
ACPI: SSDT 7FD926E6, 141A (r1 PmRef CpuPm 3000 INTL 20050228)
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
swsusp: Registered nosave memory region: 000000000009d000 - 00000000000
9e000
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000
a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000
d0000
swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000
d4000
swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000
e4000
swsusp: Registered nosave memory region: 00000000000e4000 - 00000000001
00000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 51
9573
Kernel command line: root=/dev/sda2 ro quiet BOOT_IMAGE=/boot/vmlinuz
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1866.158 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2066592k/2094656k available (6327k kernel code, 26788k reserved
, 2039k data, 384k init, 1177152k highmem)
virtual kernel memory layout:
fixmap : 0xffe14000 - 0xfffff000 (1964 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0935000 - 0xc0995000 ( 384 kB)
.data : 0xc072de8a - 0xc092bd3c (2039 kB)
.text : 0xc0100000 - 0xc072de8a (6327 kB)
Checking if this processor honours the WP bit even in supervisor mode..
. Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3734.54 BogoMIPS (lpj=
7469091)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e39d 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39
d 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs...<6>ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3732.54 BogoMIPS (lpj=
7465080)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e39d 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39
d 00000000 00000001 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
Total of 2 processors activated (7467.08 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 64 bytes
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 6922.000 MB/sec
xor: using function: pIII_sse (6922.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: CASPER
ACPI: DMI Product Name: M7X0SU
ACPI: DMI Product Version: Rev. A1
ACPI: DMI Board Name: M7X0SU
ACPI: DMI BIOS Vendor: Phoenix Technologies LTD
ACPI: DMI BIOS Date: 08/28/0892
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.k
ernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Cannot allocate resource region 0 of device 0000:00:09.0
Time: tsc clocksource has been installed.
system 00:04: ioport range 0x8000-0x80be has been reserved
system 00:04: ioport range 0x8100-0x812f has been reserved
system 00:04: ioport range 0x4d0-0x4d1 has been reserved
system 00:04: ioport range 0xfe00-0xfe00 has been reserved
system 00:04: ioport range 0x261-0x261 has been reserved
system 00:04: ioport range 0x200-0x20f has been reserved
system 00:04: ioport range 0x400-0x40f has been reserved
system 00:04: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:04: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: d0000000-d2ffffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:06.0
IO window: 3000-4fff
MEM window: dc000000-dfffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:06.0 to 64
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (bad gzip magic numbers); loo
ks like an initrd
Freeing initrd memory: 67k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug e
nabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
GFS2 (built Jul 29 2008 13:11:52) installed
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie02]
PCI: Setting latency timer of device 0000:00:07.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie02]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input1
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /devices/virtual/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /devices/virtual/input/input3
ACPI: Lid Switch [LID]
ACPI: SSDT 7FD94AA4, 02DC (r1 PmRef Cpu0Ist 3000 INTL 20050228)
ACPI: SSDT 7FD941E9, 0518 (r1 PmRef Cpu0Cst 3001 INTL 20050228)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FD94D80, 022D (r1 PmRef Cpu1Ist 3000 INTL 20050228)
ACPI: SSDT 7FD94701, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is
not present [20070126]
ACPI: Invalid passive threshold